Metal roofing is tough—but it’s not immune to damage. Unfortunately, even minor roofing damage can lead to leaks, and any moisture in your underlayment can lead to problems. That makes understanding how to find a leak in a metal roof pretty important.
To help ensure you have all the information you need to keep your metal roof in tip-top shape, here’s everything you need to know about metal roofing damage. If you need a hand or think you’ve found signs of a leak, Maycon Construction Services has the best roofing contractors in Huntington, WV. Give us a call at (304) 208-8978.
The largest part of your roof is called the roof body, and it’s the one most exposed to the elements. Signs of a leak in your roof body include:
Rust on a metal roof could indicate your roof’s finish is worn down. While the appearance of rust may not automatically equate to a leak, it’s essential to deal with the issue before it spreads. If left unchecked, rust can deteriorate the metal until holes form.
Loose, Missing, or Overly Tightened Screws
Loose or missing screws are an open opportunity for water to enter your roof. Overly tightened screws can lead to warping, which can also allow water in. Checking for these is a relatively simple, though time-consuming task. Roofing repairs are easy when spotted early.
Punctures from Weather of Foreign Objects
An apparent cause of a leak may be an actual puncture or hole in your metal roof from inclement weather or foreign objects. Even small dents can eventually lead to more significant problems as pooled water gets trapped in them, deteriorating your roof.
Improper metal roof installation may lead to panel shifting or even lifting, allowing water to get under your roof.
Roof penetrations are areas where your roof’s metal has been cut or punctured to install other features, such as chimneys, ceiling vents, skylights, and air conditioning units. The following issues can cause leaks in roof penetrations:
Cracked Flashing Seals and or Decayed Seals
There are many reasons your flashing seals may crack. Wear and tear are the most common cause of broken flashing seals, though poor installation can also be a culprit.
Gaps in your metal roof’s trim are an open invitation to water. Causes for gaps vary from improper installation, foreign object damage, or general wear and tear.
Termination and Transition Points
Termination and transition points are areas where your metal roof ends or meets with other sections of your roofing. These points have a higher prevalence of leaks than most roof areas. Some issues to check for include:
Loose trim can lead to trim gaps, which can cause significant leaks in metal roofing. Make sure to routinely check your trim to ensure it is properly fastened, with no loose pieces.
Gutter or Flashing Damage
Damage to your gutters can cause water to pool up and wear down your roof and its seals. It’s crucial, especially with a metal roof, to ensure proper water runoff. Flashing also helps protect your roof in areas of high water accumulation. Any damage to your flashing increases the chances of water entering your home.
Missing or Loose Caps
Just like loose trim or trim gaps, missing or loose ridge caps can leave your home susceptible to water damage. Ridge caps are vital as they’re the first line of defense on major seams in your roof.
What to Do If You Suspect a Leak in Your Metal Roof
If you suspect there’s a leak in your metal roof, it’s vital to get it taken care of as soon as possible. Water damage can cause problems with the structural integrity of your home. Moisture can also lead to mold buildup and affect your home’s air quality and, in turn, your health.
If you’re still unsure about how to find a leak in a metal roof or need a leak repaired, we’re here to help. Call Maycon Construction Services at (304) 208-8978 to schedule services in Huntington, WV.